Production worker

Are you ready for a new challenge?

With or without experience, come work at Fondrémy! You will receive on-site training!

Come work for a company:

  • where the values of customer satisfaction, agility, collaborative strength, excellence and respect are at the forefront;
  • which offers you the services of a chiropractor on site;
  • which provides you with work uniforms, safety glasses that fit your eyes and discounts on your work boots;
  • where you can participate in summer BBQs on Fridays;
  • where all year round you finish at noon on Fridays…..

This is what we are looking for:

Finishing worker – Shell maker – Mould maker – Moulder – Moulder – Demoulder – Coremaker

We are currently looking for several people to fill different production stations:

Day laborer in finishing (Monday to Thursday from 6am to 3pm, Friday from 6am to 12 :

  • Remove the cores from the pieces using the pitter;
  • Cut the feeds and burr on the parts using a band saw and/or chainsaw;
  • Sandblast and/or clean parts using a sandblaster, milling machine, grinding machine and/or other tools;
  • Put the finished parts through the shot blasting machine and/or soap machine;
  • Remove all defective parts from the production line.

(Monday to Wednesday from 6:00 am to 6:00 pm or from 6:00 pm to 6:00 am – night bonus 2$) :

  • Pour a liquid aluminum alloy into a metal mold, unmold the piece, inspect it and then let it cool in a basket;
  • Operate a hydraulic tilt table and/or operate a permanent mold machine;
  • Clean the cores and maintain the mold;
  • Maintain or adjust production parameters (temperature, rate, speed and quantity).

Two productivity bonuses are offered for the position of Coquilleur :
1- Bonus if quotas are reached (+10% of base salary);
2- $1 bonus when two molds are made at the same time.

Mould maker (Monday to Wednesday from 6am to 6pm)

  • Clean, maintain and install molds;
  • Adjust the molds on the tables and set the various hydraulic, pneumatic and electromechanical components;
  • Dismantle the moulds;
  • Replace the metal colors (shells) during their breaks;
  • Move various equipment using the forklift;
  • Change the baskets of the shellers and supply them with ingots;
  • Put away the molds and identify them.

Molder (Monday 7:00 a.m. to 3:00 p.m., Tuesday to Thursday 6:00 a.m. to 3:30 p.m. and Friday 6:00 a.m. to 11:00 a.m. or Monday to Thursday from 3:30 to 2:00 a.m. – 2$ evening/night bonus) :

  • Using the tracking sheet, use the template plate corresponding to the production plan;
  • Prepare the material needed to make the mold (equipment and materials);
  • Open the mold and insert the cores, if necessary, then close the mold;
  • Place the mold on the conveyor so that the caster can cast the parts.

(Monday to Thursday from 3:30 pm to 2:00 am- 2$ evening/night bonus) :

  • Preheat the crucibles at the beginning of the day;
  • Melt the alloy at the right temperature (see follower);
  • Add nitrogen or other products, depending on the alloy, during melting;
  • Plan the castings according to the space requirements of each molder.

(Monday to Thursday from 15:30 to 2:00 – 2$ evening/night bonus) :

  • Take the moulds that have been poured onto the conveyor belt and transport them to the vibrating sieve;
  • Separate the molds according to the type of sand, black or recycled;
  • Using a hammer, tap on the feeds to remove the sand;
  • Using a pitter, aim at the feeders to remove the core;
  • Notify supervisor promptly upon observation of a casting defect.

Nucleator (Monday to Thursday from 15:30 to 2:00 – 2$ evening/night bonus) :

  • Using the tracking sheet, use the core box corresponding to the production plan.
  • Prepare the material needed to make the cores (mix Solosil with sand, put in buckets).
  • Place the core box on the work surface and make the core with the sand.
  • Turn out, clean the cores and prepare them before painting.
  • Paint the cores and store them so that they are available for the molders.
  • Store the core boxes in the appropriate place.
  • Operate a shell-core machine (crowning) – coated sand or LAEMPE.
  • Install the core box on the machine and adjust the machine.

Don’t wait any longer and end us your resumenow !

For any additional information, you can contact the human resources at450 658-7111 #243, We will be happy to answer your questions quickly!

Even better, come and give us your cv in personn and you can probably get a on-site interview!

We look forward to meeting you soon!

The advantages that Fondrémy offers you


Medical and paramedical insurance


Registered Savings Plan


Life insurance


Long Term Disability Insurance


Competitive compensation

“Fondrémy, a third generation family business and leader in the foundry industry since 1975”

At Fondrémy, we are constantly striving to grow, both physically and humanly, not to mention our valued clients from several continents! We are looking for a quality inspector responsible for checking the quality of all incoming and outgoing materials and products as well as coordinating production tasks. You will be a strong advocate for quality in our company. The ideal candidate will be detail-oriented, reliable and committed. A thorough knowledge of quality standards will be an asset The objective is to ensure that our products made from the materials Aluminum / Bronze impeccable with high-performance equipment. This way, our customers will benefit from high quality products so that we can ensure long-term success.

Want to be part of the team?